2000Mbps Powerline Ethernet + WiFi 11ac Adapter

  • Overview


    The PowerGrid 9085, ITU-T networking standard compliant Ethernet adapter, is designed to meet the growing demand for perfect connectivity and coverage across multiple devices connected concurrently throughout the home. The Powerline Wi-Fi Extender wall plugs allow users to take Wi-Fi with them anywhere throughout the home or backyard and enjoy a seamless wireless experience.

    The PowerGrid 9085 supports the new generation of so-called wave2 tech, 100MHz MIMO operation with an AC filter female power socket and can be used with two fully programmable reception and transmission paths to attain up to 1.2Gps PHY over powerline. Also, combining Realtek RTK8197FS and RTK8812BRH chips utilize the concurrent dual band Wi-Fi radios, driving the Powerline Wi-Fi Extenders, enabling them to leverage both the 2.4GHz and 5GHz bands to deliver a seamless wireless experience anywhere in the home. Realtek smart Wi-Fi technology Airtime fairness/QoS will also enable the virtualization of Wi-Fi resources, so that Wi-Fi capacity can be dynamically apportioned and provisioned to different devices, services and applications.

    PG-9082 PG-9082 PG-9082



    • MIMO Performance
      Supports ITU-T baseband plans 50 and 100 MHz and MIMO techniques for powerline (based on G.9963) boosting PLC throughput up to 1.2Gbps PHY rate over powerline.
    • Concurrent Dual Band 11ac
      Realtek RTK8197FS and RTK8812BRH chips utilizing concurrent dual band 2T2R Wi-Fi interfaces, leverage both the 2.4GHz and 5 GHz bands to deliver a seamless wireless experience anywhere in the home.
    • Seamless Load balance
      Powered by Realtek band-steering technology, the Powerline Extender seamlessly balances devices amongst the dual Wi-Fi bands.
    • Smart Wi-Fi Technology
      Airtime fairness/QoS ensures the higher capacity for a distributed home network with multiple nodes.
    • Simple PLC Pairing, Plug & Play power line supports quick and easy connections with embedded plug-and-play, no extra configuration required!
    • Harmony Feature Enables Rapid Self-install
      *Future support of Comtrend’s Harmony family for rapid self-installation, including authentication of associated stations, and performs SSID and WiFi credentials from the main HGW.




    • RJ-45 X 1 for GE Ethernet
    • LED Indicators: Security (PLC),, 2.4GHz, 5.0GHz, WPS,LAN, PWR
    • Buttons: pairing, WPS, WiFi On/Off, Reset
    • Internal WiFi Antenna X 2 (PLC) :

    • MaxLinear 88LX5152 + 88LX2720
    • ITU-T G.9960 & G.9961 compliant
    • 100MHz MIMO
    • NDIM support

    WLAN (WiFi):

    • Realtek RTK8197FS + RTK8812BRH WiFi
    • 802.11 b/g/n @2.4 GHz, BW 20/40M, 2T2R
    • 802.11 a/n/ac @5GHz, Wave-2 compatible with MU-MIMO
    • 2T2R, BW 20/40/80M, external PA
    • Concurrent 2.4GHz & 5GHz
    • Capable for DFS @5GHz


    • HTTP Web-based
    • Single TR-069 entity for & WiFi functions
    • TR-069 over IPv4/v6 dual stack


    • AES 128 bits encryption ensures total data security

    Networking Protocols

    • 802.1D Ethernet Bridge
    • 802.1Q VLAN
    • Quality of Service (QoS)
    • IGMP(IPv4) Snooping & MLD(IPv6) Snooping


    • 100-240 VAC, 50Hz/60Hz, Socket: 16A for CE, 15A for FCC/UL

    Environment Condition:

    • Operating temperature: 0 ~ 40 degrees Celsius
    • Relative humidity: 8 ~ 95% (non-condensing)


    • 164.5 mm(H)x 86 mm(W) x 40.5 mm(without plug)(D)


    • FCC, cUL, CE, ITU-T Standard

    Note: Specifications are subject to change without notice.


    • Disconnect the PLC from the power source before servicing For indoor user only
    • Do NOT open the casing
    • Do NOT use near water
    • Do NOT insert sharp objects into the adapter’s socket Socket maximum output is 16A