WAP-5900

Router FTTH 11n

  • Resumen

    Tipo de producto:

    Router neutro Fast Ethernet 802.11n 2x2

    Descripción:

    Router neutro económico, con mejor cobertura Wi-Fi que sus equivalentes del mercado gracias a sus dos antenas de 5dBi.

    WAP-5900 wap-5900

    Características

    Características

    Wireless Features

    • Complies with IEEE 802.11b/g/n standards
    • Backward compatible with 802.11b/g devices while operating at 802.11n data rate
    • 2x2 MIMO technology for extended reception robustness and exceptional throughput (R44T)
    • 802.11b/g Data rates : 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps, 802.11n maximum Data
      rates :150Mbps receive/transmit PHY rate using 40MHz bandwidth (HR4100), 300Mbps receive/transmit
      PHY rate using 40MHz bandwidth (HR4300)
    • Burst-mode support for dramatically enhanced throughput
    • DSSS with DBPSK and DQPSK, CCK modulations and demodulations supported with rate compatible punctured convolution coding, with coding rates of 1/2, 2/3, 3/4 and 5/6
    • OFDM with BPSK, QPSK, 16QAM and 64QAM modulations and demodulations supported with long and short preamble
    • Complies with IEEE 802.11e QoS Enhancement (WMM)
    • IEEE 802.11i (WPA, WPA2). Open, shared key and pair-wise key authentication services

    Especificaciones

    Especificaciones

    Chipset

    • RTL8676S
    • RTL8192ER

    WLAN AP

    • ON/OFF software switch
    • IEEE 802.11b, 11g,11n, and Mixed
    • WEP, WPA TKIP/AES and WPA2 TKIP/AES/Mixed
    • Wireless Auto-channel selection
    • Wireless repeater
    • MBSSID
    • STA power saving mode
    • SSID broadcast or not
    • MAC filter

    QoS

    • Traffic shaping
    • WLAN QoS supported

    Security

    • URL Blocking
    • MAC Clone

    ALG

    • Supports H.323, SIP, RTSP, L2TP, IPSEC, FTP, PPTP, IQC,
    • MSN, NetMeeting, CUSEEME, IRC, SNMP

    DNS

    • Relay
    • Client
    • Server

    WAN connection type

    • Static IP
    • PPPoE
    • DHCP

    Management

    • Remote management
    • Configuration backup/restore
    • Firmware upgrade
    • Access control

    DDNS

    • DynDns
    • TZO
    • dlinkddns
    • Oray

    Power Requirements

    • This Device uses an AV adaptor.
      AC power adaptor: 220 VAC, 50/60Hz (can be customized)
      Output voltage:5VDC, 1.0A

    Heat & Power Dissipation

    • Power: < 5W

    Environmental

    Complies with the following standards:
    • Temperature:
      . - 0 to 40 degrees C (Standard Operating)
      . - 40 to 70 degree C (Non-operating)
    • Humidity:
      . - 10% to 90% (Non-condensing, Standard Operating)
      . - 5% to 95% (Non-condensing, Non-operating)
      . Vibration: IEC 68-2-36, IEC 68-2-6
      . Shock: IEC 68-2-29
      . Drop: IEC 68-2-32

    Documentación técnica